The use of forklift

Various attachments and more from the short piston cylinder, high pressure hose, hose winder, quick connectors, circular ring, is a dedicated parts and other components. These parts can be cleaned with reference to the general hydraulic parts, and maintenance. Re-attachment should be noted that in addition to the use of oil leaking pipeline system, cracking and other anomalies, but especially the case with the allowable load, lifting height, size and scope of the case with the goods, the width of the run-time, shall strictly according to performance parameters attachments execution, we can not overload, but not partial load. For partial load operation, small tonnage truck with attachments, short partial load range should be within + -150mm.

In forklift spare parts use, paired two goods cross on thick, fork length should be approximately equal. After two forks mounted on the fork, then it should be kept on the same horizontal plane. Must strictly abide by the rules, do not allow overloading or long-distance transport of goods; or again when carrying long objects gravity position can not be determined, to have someone directing, and be careful. Pork on a skewer with a cargo of goods, the fork should be suitable for the load from the width of the fork is inserted beneath the load as deep as possible, with minimal post-mast tilt to stabilize the load after load to prevent sliding, down load, allows a small amount of mast forward in order to secure cargo and out of the fork down. When the job, the fork should be in the form of low-speed to 30 ~ 40mm from the ground is appropriate, should be appropriate to the door frame backward, driving shall be arbitrarily raise or lower the off road rough terrain forklift, may not turn across the slope and driving on the ramp, not allowed to use pallet fork approach unloading; not allowed to use forks directly Scraper dangerous goods and flammable materials such as; not allowed to use a single job or inertial force fork forks goods; better not use round or braking inertia Humping Easy roll goods.